طراحی برد بر اساس آی سی S3C2440A از شرکت سامسونگ است. در این آی سی از معماری 9ARM استفاده شده است:

• بیشترین فرکانس کاری 400MHz
• حافظه NAND Flash با گنجایش 64Mb و NOR FLASH: 2Mb
• حافظه mDDR گنجایش 2MB

قابل نصب بر روی برد می باشند و توانایی اجرای نرم افزارهای مربوطه
Windows(CE) , Android , Linux را دارا می باشد. سیستم عامل های

• Features:
• Core Board Hardware Parameter
• CPU：Samsung S3C2440A, Kernel ARM920T，Typical Frequency 400MHz
• SDRAM: 64Mbyte
• FLASH：NOR FLASH: 2Mb, for boot loader NAND FLASH:64Mb (K9F1208, the user can change to 16M, 32M or 128M)
• Platter Hardware Parameter
• LCD Interface：4-wire resistance touch panel interface; A 50- chip LCD interface has drawn out all the signal of the LCD controller, and the 74LVTH162245 actuation has added to the pin of the signal, therefore the LCD output is more stable and reliable. Support black and white, 4 levels of gradations, 16 levels of gradations, 256 colors, 4096 color STN liquid crystal box, the size from 3.5 inches to 12.1 inches; Support black and white, 4 levels of gradations, 16 levels of gradations, 256 colors, 64Kcolors, true color TFT liquid crystal box, the size from 3.5 inches to 12.1 inches; The sign matches TFT 4.3 '(480*272) screen with touch panel； A 5V power output interface is drawn out, being able to supply power for 5V CCFL back light module of great-size TFT liquid crystal screen; 3.3V/5V LCD display is compatible；
• VGA Contact Interface： Can directly connect CRT or LCD with different VGA interfaces, with contrast tuning potentiometer;
• Touch screen：Four-wire resistance；
• Audio Interface： Use IIS interface chip UDA1341, stereo audio output interface can connect earphone and speaker; support recording, microphone input interface can connect microphone
• USB Host：A HOST USB1.1 interface, with self-insurance device to protect the external power supply system
• USB Client：A Device USB1.1 interface
• Camera Interface：A 2 mm two-row plug for camera expansion, the user may use this expansion mouth to connect cameras of other models;
• Serial port：Two five-line asynchronous serial ports, the baud rate up to 115200bps； IRDA infrared data communication port；One nine-line asynchronous serial port, expanded with ST16C550, the baud rate up to 1.5Mbps；
• Infrared Correspondence Interface：one；
• Ethernet Ports： A 100M network port，using DM9000，having the connection and the transmission indicator；A 10M network port，using CS8900Q3，having the connection and the transmission indicator；
• Memory Port：A SD card interface, accessing the 2G SD card； A CF card interface (3.3V, adding the 74LVTH162245 actuation), works in the True IDE pattern;
• CAN Bus Interface：support CAN2.0A and CAN2.0B;
• A/D：The adjustable resistance from the pin of ADC to verify a/d conversion；
• Keyboard：2x4 matrix keyboard；
• EEPROM：I2C interface 24C02；
• JTAG Interface：A standard 20-chip Multi-ICE JTAG interface , supporting the debugging of ADS1.2, SDT2.51 and so on;
• RTC Clock：Internal real-time clock（reserve lithium battery supplied）；
• LED：power and several work indicator lights；
• Buzzer: one, controlled by PWM；
• Microphone：one；
• Reset Circuit: Combining the manual reset and the chip replacement, the chip is MAX811; the reset is reliable and stable;
• Multi-function Expansion Interface: system control bus such as 16Bit data bus/32bit address bus /chip select、read-write、interrupt, etc.；
• Power Interface：5V power supply，having power switch and indicator light；

• Software Resource
• The operation systems supporting
• WinCE5.0
• Linux2.6
• ADS1.2
• WinCE5.0 Operation System
• Board Support Package: WinCE 5.0 BSP
• Equipment Actuation（Device Driver:( Ethernet, USB Host, USB Slave, Serial Port, LCD, Touch Screen, Audio, SD/MMC port, IRDA, IDE/CF, CAN bus, Camera, RTC, Keypad, etc) Supports the MP3 player and the MP4 video player。 Supports many kinds of network applications, for instance, HTTP.
• Linux Operation System
• Kernel: Linux2.6
• System Vectoring Procedure: Boot Loader (source code)
• Filing System: CRAMFS
• GUI: QT
• Equipment Actuation ( Device Driver）：Ethernet, USB Host, Serial Port, LCD, Touch Screen，Audio, SD/MMC port, IDE/CF, Camera, RTC, Keypad, etc； Supports the MP3 player and the MP4 video player。 Supports many kinds of network applications, for instance, HTTP.
• Non-operation system test：Including: The RTC real-time clock tests, the button test (interrupt test), the buzzer test, the SD card read-write test, the ADC test, the audio frequency broadcast wav music test, audio frequency sound recording test, IrDA infrared test, touch screen test, TFT liquid crystal box test, VGA test, camera test and so on;

• Packaging List
• • CES-2440 core board 1； （standard）
  • CES-2440 surrounding plane 1； （standard）
  • CES-2440 user CD-ROM 1； （standard）
  • 4.3’ TFT LCD Screen，1; other sizes are available，all with touch panel；（standard）
  • SUPER JTAG debugging head（with 20-core cable） 1；（standard）
  • parallel line（one-on-one）1；（standard）
  • serial line (cross-serial line) 1；（standard）
  • line (crossover cable) 1；（standard）
  • USB cable 1；（standard）
  • 12V DC adapter 1；（standard）
  • touch pen 1；（standard）
  • SD Card（optional）
  • CF Card（optional）
  • 1.3-megapixel camera（optional）
  • Packing Box 1；（standard）
  • High-grade packaging and aluminum box（optional）
  • User Manual；（optional）

• The development tools and source code on user CD-ROM
• ADS1.20 Setup procedure (evaluation version)
• SUPERJTAG supporting ADS1.20
• debugging software ARMJTAGDEBUGFINAL；
• flash programmer software tools SJF2440（with NT/2000/XP Solutions）
• serial instrument software sscom32.exe、dnw.exe、tftp.exe；
• 64K colors（RGB565）photos matrix software；
• USB Device interface driver；
• BIOS source code（Project document of ADS1.20）；
• test procedure (Project document of ADS1.20，including all the source codes)，As follows：The RTC real-time clock tests, the button test (interrupt test), the buzzer test, the SD card read-write test, the ADC test, the audio frequency broadcast wav music test, audio frequency sound recording test, IrDA infrared test, touch screen test, TFT liquid crystal box test, CAN bus test, VGA test, camera test and so on;
• Linux 2.6 & 2.4 for S3c2440 kernel source code and compiler tools;
• WINCE 5.0 & 4.2 development kit；
• The core circuit board and backplane schematic（pdf）；
• Development board manual（pdf）；
• Manual and materials of all the chips used on the development board；
• Multimedia presentation of the use of ADS,DNW serial port and hyper terminal

قیمت: فایل دانلود

در صورت نیاز مشتری، ایجاد تغییرات در سخت افزار و نرم افزار محصول با توجه به
کاربرد مورد نظر امکان پذیر است

*برای سفارش جعبه لطفا تماس حاصل فرمایید

طراحی برد بر اساس آی سی S3C6410 از شرکت سامسونگ است. در این آی سی از معماری 11ARM استفاده شده است:

• بیشترین فرکانس کاری 667MHz
• حافظه NAND Flash با گنجایش 1GB MLC
• حافظه mDDR گنجایش 256MB

قابل نصب بر روی برد می باشند و توانایی اجرای نرم افزارهای مربوطه
Windows(CE) , Android , Linux را دارا می باشد. سیستم عامل های

• Features:
• Central processing unit (CPU): Samsung S3C6410X, ARM1176JZF-S, Frequency 667MHZ
• Mobile DDR SDRAM: 128MB ~512MB, Mobile DDR SDRAM
• FLASH: 1GB NAND FLASH
• Touch screen: Four-line resistance
• TV output: one, composite video signal output, accessing to kinds of TV
• S-VIDEO interface：one，S-VIDEO video signal output
• TV input: one, composite video signal input
• VGA interface: One, Standard VGA output interface
• Audio: one AC97, wolf’s WM9713
• USB HOST: One USB HOST interface, adopting the restoration of self-insurance protection device to protect the external power system
• USB OTG: One, USB 2.0 HS OTG
• Serial port: three serial ports, baud rate as high as 115200bps; An IRDA infrared data communication port
• Infrared communication port: one
• Ethernet port: one 10M/100M Ethernet port, DM9000, with connection and transmission indicator lights
• WI-FI interface: one, built-in, accordance with 802.11 b/g
• GPS module: one, global positioning
• HSMMC card interface: one high-speed SD card interface, compatible of SD/MMC/MMC4.0 cards
• SD card interface: one ordinary SD card interface
• CF card interface: one , standard CF R3.0
• Camera interface: A 2mm-pitch double-socket for camerea expansion; the users may use this expansion slot to connect other models
• Keyboard: 3 external interrupt button, 5 scan button, 1 five-switch
• EEPROM: two 12C interfaces: 24C08, 24C128
• JTAG interface: a standard 20-chip Multi-ICE JTAG interface , supporting the debugging of ADS1.2,SDT2.51,etc
• RTC clock: internal real-time clock (with the back-up lithium battery)
• LED: power supply and several indicator lights
• Reset circuit: combining the manual reset and chip reset; the chip is MAX811; the reset is stable and reliable
• Expansion interface: lead to the signal which users need, including the bus, interrupt, I/O signals, and so on
• Power interface: 12V power supply, with power switch and indicator light

• Software Resource
• The supporting operating system: WinCE6.0；Linux2.6.21; Linux 2.6.24; Ubuntu 9.04; Android 0.9
• WinCE6.0 Operating System:
• BSP:WinCE 6.0 BSP
• Device Driver: Ethernet, USB Host, USB Slave, Serial Port, LCD, Touch Screen, TV OUT, Audio, SD/MMC port, IRDA, IDE, Camera, RTC, Keypad, MFC,CF,GPS,WI-FI and so on. Supporting MP3 players and MP4 video player Supporting a wide range of network applications, for instance: http
• Linux 2.6.24 Operating System:
• Kernel: Linux2.6.24 (u-boot)
• The System Leading Process: U-boot-1.1.6 (no need of JTAG, supporting SD card and NANDFLASH to start u-boot)
• debugging tool: DNW v0.60C
• Cross Compile: cross-4.2.2-eabi, cross-3.4.1, cross-3.3.2
• The Document System: cramfs
• GUI: QT
• Device Driver: SD/MMC, Ethernet, LCD, Audio, Camera, VGA, USB host, UART, 1G Nand Flash, 128M DDR, TOUCH Supporting MP3 audio player and MP4 video player
• Ubuntu 9.04 operating system
• Kernel: Linux2.6.29 (u-boot)
• The System Leading Process: U-boot-1.1.6 (no need of JTAG, supporting SD card and NANDFLASH to start u-boot)
• debugging tool: DNW v0.60C, MoviNAND_Fushing_Tool
• Cross Compile: Arm-none-linux-gnueabi
• The Document System: Ext3
• GUI: Ubuntu 9.04
• Device Driver: SD/MMC, LCD, UART, 1G Nand Flash, 128M DDR, TOUCH
• Android 0.9 Operating System
• Kernel: Linux2.6.29 (u-boot)
• The System Leading Process: U-boot-1.1.6 (no need of JTAG, supporting SD card and NANDFLASH to start u-boot)
• debugging tool: DNW v0.60C, MoviNAND_Fushing_Tool
• Cross Compile: Arm-none-linux-gnueabi
• The Document System: Yaffs2
• GUI: Android 0.9
• Device Driver: SD/MMC, LCD, UART, 1G Nand Flash, 128M DDR, TOUCH

• Packaging List:
• CES-6410 Prototype core board: one; (standard)
• CES-6410 Prototype backplane: one; (standard)
• CES-6410 Prototype CD-ROM: one; (standard)
• TFT LCD: 7’ touch screen; one; (standard)
• SUPER JTAG debugging end(with 20-core cable): one; (standard)
• Parallel line(one-to-one): one; (standard)
• Serial lines (Direct Connect Serial Line):one; (standard)
• Cable (cross-line cable):one; (standard)
• USB line: one; (standard)
• 12V DC adapter: one; (standard)
• Touch pen: one; (standard)
• SD card: (standard)

قیمت: فایل دانلود

در صورت نیاز مشتری، ایجاد تغییرات در سخت افزار و نرم افزار محصول با توجه به
کاربرد مورد نظر امکان پذیر است

*برای سفارش جعبه لطفا تماس حاصل فرمایید
: دانلودها

• مشخصات (ARM11.Pdf)

طراحی برد بر اساس آی سی S5PV210از شرکت سامسونگ است. در این آی سی از معماری Cortex-A8استفاده شده است:

• بیشترین فرکانس کاری 1GHz
• حافظه NAND Flash با گنجایش 1GB
• حافظه SRAM گنجایش 1.0GB DDR II

قابل نصب بر روی برد می باشند و توانایی اجرای نرم افزارهای مربوطه
Windows(CE) , Android , Linux را دارا می باشد. سیستم عامل های
قیمت: فایل دانلود

در صورت نیاز مشتری، ایجاد تغییرات در سخت افزار و نرم افزار محصول با توجه به
کاربرد مورد نظر امکان پذیر است

*برای سفارش جعبه لطفا تماس حاصل فرمایید
: دانلودها

• مشخصات (Cortax_A8.Pdf)